Êîìïàíèÿ Àêòèâàòîð
Activator
Milling.Activation.Synthesis.
Russian
 7 960 780 77 06
7(383)452 68 31

Fine grinding industrial mills

Centrifugical elliptical ball mill «Activator -Ñ100»

Centrifugical elliptical ball  mill «Activator -C100» is intended for production of finely milled
product. The output  capacity  of  mill  «Activator -C100»  can  reach  60-100 kg/h  grinding 
silica sand.  Mill can grind of an experimental batch  up 10 kg  to 1-2  ton  per day. This is 
suitable for developing technologies and production of experimental batches of material.
  -  Input material is to 5 mm.The smaller the size of input material
the finer the final product is.
	
  -  The fineness of milling depends on the size of the 
     input material, its hardness  and  technical 
     parameters  of  the  milling. It may be 
     up to 1 - 3 μm.The fineness of milling depends on the 
size of the input material, its hardness
and  technical parameters  of  the 
milling. Adding of dispersant  may 
improve the quality of milling  and 
facilitate milling of material to an
average particle size 1 - 3 μm.

  -  Output capacity of mill is 60-100 kg.

  -  Mill is supplied as milling complex.
Output capacity 60-100 kg/h
Rotation speed 1200 rpm
Power 5 kW·h
Dimensions of mill, mm:
length*width*height 1470*1015*1370
Mass of mill 300 kg
Centrifugical elliptical ball  mill «Activator -C100»  can be operated  as a  continuous  mixer of bulk 
materials while grinding to finely milled state. 
When  grinding  additives  may  be introduced  to impart  the necessary technological product properties, 
including dispersants, plasticizers, etc. For example, the grinding and activation of cement with additives, 
immediately before preparation of concrete mix.
Mill  can  be  used for  grinding and  activation of cement,  for  the  line  to prepare  foamed and aerated 
concrete, silica foam, dry mortars, concretes LWBs. For the milling of fillers in construction and paintwork 
manufacture: marble, chalk, talc, wollastonite, calcite, quartz, sand, etc.

Standard delivery set of mill «Activator -Ñ100»

Options

Results from grinding of materials to mill in
«Activator - C100»

PIGMENT BASED ON IRON OXIDE

Distribution curves and tables of correspondence D (m) and P (%) of materials Distribution curves and tables of correspondence D (m) and P (%) of materials
Pigment based on iron oxide.

All photos «Activator - C100»

© Àêòèâàòîð, 2021 - 2022.